Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.0-CURRENT #0: Wed Feb 18 12:41:20 GMT 2009
    brucec@tau.draftnet:/usr/obj/usr/src/sys/GENERIC
WARNING: WITNESS option enabled, expect reduced performance.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Turion(tm) X2 Dual-Core Mobile RM-70 (1999.19-MHz K8-class CPU)
  Origin = "AuthenticAMD"  Id = 0x200f31  Stepping = 1
  Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
  Features2=0x2001<SSE3,CX16>
  AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!>
  AMD Features2=0x131f<LAHF,CMP,SVM,ExtAPIC,CR8,Prefetch,OSVW,SKINIT>
  TSC: P-state invariant
  Cores per package: 2
usable memory = 4008853504 (3823 MB)
avail memory  = 3839569920 (3661 MB)
ACPI APIC Table: <HPQOEM SLIC-MPC>
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
ioapic0: Changing APIC ID to 4
ioapic0 <Version 2.1> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <HPQOEM SLIC-MPC> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x3> port 0x62,0x66 on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
acpi_hpet0: HPET never increments, disabling
device_attach: acpi_hpet0 attach returned 6
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0x7000-0x70ff mem 0xc0000000-0xcfffffff,0xd2400000-0xd240ffff,0xd2300000-0xd23fffff irq 18 at device 5.0 on pci1
pci1: <multimedia, HDA> at device 5.1 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 4.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 5.0 on pci0
pci8: <ACPI PCI bus> on pcib3
pci8: <base peripheral> at device 0.0 (no driver attached)
pci8: <base peripheral, SD host controller> at device 0.2 (no driver attached)
pci8: <base peripheral> at device 0.3 (no driver attached)
pci8: <base peripheral> at device 0.4 (no driver attached)
pcib4: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pci9: <ACPI PCI bus> on pcib4
ath0: <Atheros 5424/2424> mem 0xd1100000-0xd110ffff irq 18 at device 0.0 on pci9
ath0: [ITHREAD]
ath0: WARNING: using obsoleted if_watchdog interface
ath0: mac 14.2 phy 7.0 radio 10.2
pcib5: <ACPI PCI-PCI bridge> at device 7.0 on pci0
pci10: <ACPI PCI bus> on pcib5
re0: <RealTek 8101E/8102E/8102EL PCIe 10/100baseTX> port 0x2000-0x20ff mem 0xd1010000-0xd1010fff,0xd1000000-0xd100ffff irq 19 at device 0.0 on pci10
re0: Using 1 MSI messages
re0: Chip rev. 0x24800000
re0: MAC rev. 0x00000000
miibus0: <MII bus> on re0
rlphy0: <RTL8201L 10/100 media interface> PHY 1 on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
re0: Ethernet address: 00:1e:ec:f5:fd:4f
re0: [FILTER]
atapci0: <ATI AHCI controller> port 0x8038-0x803f,0x804c-0x804f,0x8030-0x8037,0x8048-0x804b,0x8010-0x801f mem 0xd2508000-0xd25083ff irq 22 at device 17.0 on pci0
atapci0: [ITHREAD]
atapci0: AHCI Version 01.10 controller with 6 ports PM supported
ata2: <ATA channel 0> on atapci0
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: [ITHREAD]
ata4: <ATA channel 2> on atapci0
ata4: [ITHREAD]
ata5: <ATA channel 3> on atapci0
ata5: [ITHREAD]
ata6: <ATA channel 4> on atapci0
ata6: [ITHREAD]
ata7: <ATA channel 5> on atapci0
ata7: [ITHREAD]
ohci0: <OHCI (generic) USB controller> mem 0xd2507000-0xd2507fff irq 16 at device 18.0 on pci0
ohci0: [ITHREAD]
usbus0: <OHCI (generic) USB controller> on ohci0
ohci1: <OHCI (generic) USB controller> mem 0xd2506000-0xd2506fff irq 16 at device 18.1 on pci0
ohci1: [ITHREAD]
usbus1: <OHCI (generic) USB controller> on ohci1
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xd2508500-0xd25085ff irq 17 at device 18.2 on pci0
ehci0: [ITHREAD]
usbus2: EHCI version 1.0
usbus2: <EHCI (generic) USB 2.0 controller> on ehci0
ohci2: <OHCI (generic) USB controller> mem 0xd2505000-0xd2505fff irq 18 at device 19.0 on pci0
ohci2: [ITHREAD]
usbus3: <OHCI (generic) USB controller> on ohci2
ohci3: <OHCI (generic) USB controller> mem 0xd2504000-0xd2504fff irq 18 at device 19.1 on pci0
ohci3: [ITHREAD]
usbus4: <OHCI (generic) USB controller> on ohci3
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xd2508400-0xd25084ff irq 19 at device 19.2 on pci0
ehci1: [ITHREAD]
usbus5: EHCI version 1.0
usbus5: <EHCI (generic) USB 2.0 controller> on ehci1
pci0: <serial bus, SMBus> at device 20.0 (no driver attached)
atapci1: <ATI IXP700 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x8000-0x800f irq 16 at device 20.1 on pci0
ata0: <ATA channel 0> on atapci1
ata0: [ITHREAD]
pci0: <multimedia, HDA> at device 20.2 (no driver attached)
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib6: <ACPI PCI-PCI bridge> at device 20.4 on pci0
pci128: <ACPI PCI bus> on pcib6
acpi_acad0: <AC Adapter> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz0: _HOT value is absurd, ignored (226.8C)
atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model Generic PS/2 mouse, device ID 0
battery0: <ACPI Control Method Battery> on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
cpu1: <ACPI CPU> on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ppc0: cannot reserve I/O port range
Timecounters tick every 1.000 msec
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 480Mbps High Speed USB v2.0
usbus3: 12Mbps Full Speed USB v1.0
usbus4: 12Mbps Full Speed USB v1.0
usbus5: 480Mbps High Speed USB v2.0
ad4: 238475MB <Hitachi HTS543225L9A300 FBEOC44C> at ata2-master SATA300
ugen0.1: <ATI> at usbus0
ushub0: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <ATI> at usbus1
ushub1: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <ATI> at usbus2
ushub2: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
ugen3.1: <ATI> at usbus3
ushub3: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ugen4.1: <ATI> at usbus4
ushub4: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
ugen5.1: <ATI> at usbus5
ushub5: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5
ushub0: 3 ports with 3 removable, self powered
ushub1: 3 ports with 3 removable, self powered
ushub3: 3 ports with 3 removable, self powered
ushub4: 3 ports with 3 removable, self powered
GEOM: ad4: partition 3 does not start on a track boundary.
GEOM: ad4: partition 3 does not end on a track boundary.
GEOM: ad4: partition 2 does not start on a track boundary.
GEOM: ad4: partition 2 does not end on a track boundary.
GEOM: ad4: partition 1 does not end on a track boundary.
SMP: AP CPU #1 Launched!
WARNING: WITNESS option enabled, expect reduced performance.
GEOM_LABEL: Label for provider ad4s2 is ntfs/HP_RECOVERY.
Trying to mount root from ufs:/dev/ad4s3a
ushub2: 6 ports with 6 removable, self powered
ushub5: 6 ports with 6 removable, self powered
ugen2.2: <SuYin> at usbus2
lock order reversal:
 1st 0xfffffffe8cf8f8e0 bufwait (bufwait) @ /usr/src/sys/kern/vfs_bio.c:2443
 2nd 0xffffff0006adac00 dirhash (dirhash) @ /usr/src/sys/ufs/ufs/ufs_dirhash.c:275
KDB: stack backtrace:
db_trace_self_wrapper() at db_trace_self_wrapper+0x2a
_witness_debugger() at _witness_debugger+0x2e
witness_checkorder() at witness_checkorder+0x81e
_sx_xlock() at _sx_xlock+0x55
ufsdirhash_acquire() at ufsdirhash_acquire+0x33
ufsdirhash_add() at ufsdirhash_add+0x19
ufs_direnter() at ufs_direnter+0x88b
ufs_makeinode() at ufs_makeinode+0x338
VOP_CREATE_APV() at VOP_CREATE_APV+0x8d
vn_open_cred() at vn_open_cred+0x479
kern_openat() at kern_openat+0x169
syscall() at syscall+0x1bf
Xfast_syscall() at Xfast_syscall+0xab
--- syscall (5, FreeBSD ELF64, open), rip = 0x800c35ebc, rsp = 0x7fffffffe2a8, rbp = 0xa ---
lock order reversal:
 1st 0xffffff000e5b9248 filedesc structure (filedesc structure) @ /usr/src/sys/kern/kern_descrip.c:1076
 2nd 0xffffff000e82cba8 ufs (ufs) @ /usr/src/sys/kern/vfs_subr.c:4100
KDB: stack backtrace:
db_trace_self_wrapper() at db_trace_self_wrapper+0x2a
_witness_debugger() at _witness_debugger+0x2e
witness_checkorder() at witness_checkorder+0x81e
__lockmgr_args() at __lockmgr_args+0xc2a
ffs_lock() at ffs_lock+0x8c
VOP_LOCK1_APV() at VOP_LOCK1_APV+0x9b
_vn_lock() at _vn_lock+0x47
knlist_remove_kq() at knlist_remove_kq+0x73
knote_fdclose() at knote_fdclose+0x177
kern_close() at kern_close+0xe6
syscall() at syscall+0x1bf
Xfast_syscall() at Xfast_syscall+0xab
--- syscall (6, FreeBSD ELF64, close), rip = 0x800e35e6c, rsp = 0x7fffffffe468, rbp = 0x80104f800 ---
hdac0: <ATI SB600 High Definition Audio Controller> mem 0xd2500000-0xd2503fff irq 16 at device 20.2 on pci0
hdac0: HDA Driver Revision: 20090215_0128
hdac0: [ITHREAD]
hdac0: HDA Codec #0: IDT 92HD71B7
hdac0: HDA Codec #1: Lucent/Agere Systems (Unknown)
hdac1: <ATI RS780 High Definition Audio Controller> mem 0xd2410000-0xd2413fff irq 19 at device 5.1 on pci1
hdac1: HDA Driver Revision: 20090215_0128
hdac1: [ITHREAD]
hdac1: HDA Codec #0: ATI RS690/780 HDMI
pcm0: <HDA IDT 92HD71B7 PCM #0 Analog> at cad 0 nid 1 on hdac0
pcm1: <HDA IDT 92HD71B7 PCM #1 Analog> at cad 0 nid 1 on hdac0
pcm2: <HDA IDT 92HD71B7 PCM #2 Digital> at cad 0 nid 1 on hdac0
pcm3: <HDA ATI RS690/780 HDMI PCM #0 Digital> at cad 0 nid 1 on hdac1
usb2_set_config_index:570: could not read device status: USB_ERR_SHORT_XFER
ugen2.3: <Apple> at usbus2
umass0: <Apple iPod, class 0/0, rev 2.00/0.01, addr 3> on usbus2
umass0:  SCSI over Bulk-Only; quirks = 0x0000
umass0:0:0:-1: Attached to scbus0
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <Apple iPod 1.62> Removable Direct Access SCSI-0 device 
da0: 40.000MB/s transfers
da0: 19073MB (39063024 512 byte sectors: 255H 63S/T 2431C)
(da0:umass-sim0:0:0:0): READ(10). CDB: 28 0 2 54 d ef 0 0 1 0 
(da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(da0:umass-sim0:0:0:0): SCSI Status: Check Condition
(da0:umass-sim0:0:0:0): ILLEGAL REQUEST asc:21,0
(da0:umass-sim0:0:0:0): Logical block address out of range
(da0:umass-sim0:0:0:0): Unretryable error
GEOM: da0: partition 2 does not end on a track boundary.
(da0:umass-sim0:0:0:0): READ(10). CDB: 28 0 2 54 d ef 0 0 1 0 
(da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(da0:umass-sim0:0:0:0): SCSI Status: Check Condition
(da0:umass-sim0:0:0:0): ILLEGAL REQUEST asc:21,0
(da0:umass-sim0:0:0:0): Logical block address out of range
(da0:umass-sim0:0:0:0): Unretryable error
GEOM_LABEL: Label for provider da0s2 is msdosfs/IPOD.
umass0: at ushub2, port 5, addr 3 (disconnected)
(da0:umass-sim0:0:0:0): lost device
(da0:umass-sim0:0:0:0): removing device entry
GEOM_LABEL: Label msdosfs/IPOD removed.
ugen2.3: <Apple> at usbus2 (disconnected)
usb2_set_config_index:570: could not read device status: USB_ERR_SHORT_XFER
ugen2.3: <Apple> at usbus2
umass0: <Apple iPod, class 0/0, rev 2.00/0.01, addr 3> on usbus2
umass0:  SCSI over Bulk-Only; quirks = 0x0000
umass0:0:0:-1: Attached to scbus0
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <Apple iPod 1.62> Removable Direct Access SCSI-0 device 
da0: 40.000MB/s transfers
da0: 19073MB (39063024 512 byte sectors: 255H 63S/T 2431C)
can't re-use a leaf (minimum_cmd_size)!
(da0:umass-sim0:0:0:0): READ(10). CDB: 28 0 2 54 d ef 0 0 1 0 
(da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(da0:umass-sim0:0:0:0): SCSI Status: Check Condition
(da0:umass-sim0:0:0:0): ILLEGAL REQUEST asc:21,0
(da0:umass-sim0:0:0:0): Logical block address out of range
(da0:umass-sim0:0:0:0): Unretryable error
GEOM: da0: partition 2 does not end on a track boundary.
(da0:umass-sim0:0:0:0): READ(10). CDB: 28 0 2 54 d ef 0 0 1 0 
(da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(da0:umass-sim0:0:0:0): SCSI Status: Check Condition
(da0:umass-sim0:0:0:0): ILLEGAL REQUEST asc:21,0
(da0:umass-sim0:0:0:0): Logical block address out of range
(da0:umass-sim0:0:0:0): Unretryable error
GEOM_LABEL: Label for provider da0s2 is msdosfs/IPOD.
umass0: at ushub2, port 5, addr 3 (disconnected)
(da0:umass-sim0:0:0:0): lost device
(da0:umass-sim0:0:0:0): removing device entry
GEOM_LABEL: Label msdosfs/IPOD removed.
ugen2.3: <Apple> at usbus2 (disconnected)
ugen2.3: <USB> at usbus2
umass0: <USB Flash Disk, class 0/0, rev 2.00/2.00, addr 3> on usbus2
umass0:  SCSI over Bulk-Only; quirks = 0x0000
umass0:0:0:-1: Attached to scbus0
(probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 
(probe0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(probe0:umass-sim0:0:0:0): SCSI Status: Check Condition
(probe0:umass-sim0:0:0:0): UNIT ATTENTION asc:28,0
(probe0:umass-sim0:0:0:0): Not ready to ready change, medium may have changed
(probe0:umass-sim0:0:0:0): Retrying Command (per Sense Data)
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <Generic USB Flash Disk 2.00> Removable Direct Access SCSI-2 device 
da0: 40.000MB/s transfers
da0: 250MB (512000 512 byte sectors: 64H 32S/T 250C)
can't re-use a leaf (minimum_cmd_size)!
GEOM: da0: partition 1 does not start on a track boundary.
umass0: at ushub2, port 5, addr 3 (disconnected)
(da0:umass-sim0:0:0:0): lost device
(da0:umass-sim0:0:0:0): removing device entry
ugen2.3: <USB> at usbus2 (disconnected)
ugen2.3: <USB> at usbus2
umass0: <USB Flash Disk, class 0/0, rev 2.00/2.00, addr 3> on usbus2
umass0:  SCSI over Bulk-Only; quirks = 0x0000
umass0:0:0:-1: Attached to scbus0
(probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 
(probe0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(probe0:umass-sim0:0:0:0): SCSI Status: Check Condition
(probe0:umass-sim0:0:0:0): UNIT ATTENTION asc:28,0
(probe0:umass-sim0:0:0:0): Not ready to ready change, medium may have changed
(probe0:umass-sim0:0:0:0): Retrying Command (per Sense Data)
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <Generic USB Flash Disk 2.00> Removable Direct Access SCSI-2 device 
da0: 40.000MB/s transfers
da0: 250MB (512000 512 byte sectors: 64H 32S/T 250C)
can't re-use a leaf (minimum_cmd_size)!
GEOM: da0: partition 1 does not start on a track boundary.
umass0: at ushub2, port 5, addr 3 (disconnected)
(da0:umass-sim0:0:0:0): lost device
(da0:umass-sim0:0:0:0): removing device entry
ugen2.3: <USB> at usbus2 (disconnected)
ugen2.3: <PEAK III> at usbus2
umass0: <PEAK III Flash Drive, class 0/0, rev 2.00/1.00, addr 3> on usbus2
umass0:  SCSI over Bulk-Only; quirks = 0x0000
umass0:0:0:-1: Attached to scbus0
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <PEAK III Flash Drive 0.00> Removable Direct Access SCSI-2 device 
da0: 40.000MB/s transfers
da0: 1967MB (4030463 512 byte sectors: 255H 63S/T 250C)
can't re-use a leaf (minimum_cmd_size)!
umass0: at ushub2, port 5, addr 3 (disconnected)
(da0:umass-sim0:0:0:0): lost device
(da0:umass-sim0:0:0:0): removing device entry
ugen2.3: <PEAK III> at usbus2 (disconnected)
ugen2.3: <PEAK III> at usbus2
umass0: <PEAK III Flash Drive, class 0/0, rev 2.00/1.00, addr 3> on usbus2
umass0:  SCSI over Bulk-Only; quirks = 0x0000
umass0:0:0:-1: Attached to scbus0
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <PEAK III Flash Drive 0.00> Removable Direct Access SCSI-2 device 
da0: 40.000MB/s transfers
da0: 1967MB (4030463 512 byte sectors: 255H 63S/T 250C)
can't re-use a leaf (minimum_cmd_size)!